placement of transducer in tinny
Submitted by Faulkner Family on Sun, 2023-07-30 10:57
Went to install the transducer on the tinny to discover all the chines are only about 10cm apart where the flat part of the hull is. Where would be the best place to mount it as I have never encounted this problem before. I know it needs clean water 
____________________________________________________________________________
RUSS and SANDY. A family that fishes together stays together
Image Upload:
tot
Posts: 1159
Date Joined: 31/01/10
For me
I would put it on a slider and drop it deep when you are using it and remove when not.
Reverse cycle a/c supply and install - Ducted and wall splits
Billcollector
Posts: 2080
Date Joined: 16/05/09
Will send a photo of mine
Will send a photo of mine russ when my phone gets charged. As tot said put it on a slide to avoud wrecking it.
Faulkner Family
Posts: 18023
Date Joined: 11/03/08
Cheers for the info. Where
Cheers for the info.
Where would I get a slider from or just make my own version
RUSS and SANDY. A family that fishes together stays together
Mark_M
Posts: 176
Date Joined: 10/04/15
Slider $
$21 at Annaconda, $25 at all the other places like BLA, BCF, RTM, CS Smiths and Boat Warehouse
sunshine
Posts: 2600
Date Joined: 03/03/09
Yup definitely put on a slider
Allows easy beach launch and retrieve as you can lift the transducer out of the way and avoid any damage. I filled my slider to a piece of wood and had two G clamps to fix it to the back of the boat....this allows heaps of adjustment to find the perfect spot....then mark it on the wood and the hull with indelible marker pen. RTM had sliders last time I was in there
tot
Posts: 1159
Date Joined: 31/01/10
Something like this
https://www.tradeinn.com/waveinn/en/seanox-sliding-transducer-bracket-330-mm/137923382/p?utm_source=google_products&utm_medium=merchant&id_producte=12263710&country=au&gad=1&gclid=CjwKCAjwlJimBhAsEiwA1hrp5p6GxFwp1iPXnLpdWk9Y4FH95rh_tAoZIVxhLbBNU7v9mMkQ3bOxxxoCx90QAvD_BwE&gclsrc=aw.ds
Will allow you some depth without the tightening handle to be too deep.
You can get many types from places like BCF or Anaconda etc.
Reverse cycle a/c supply and install - Ducted and wall splits