Ceiling Patching Question
Submitted by Jackfrost80 on Sun, 2023-05-07 17:55
I need a new exhaust fan in my room but the hole is 300mm and I want an inline fan which only needs a 280mm cutout.. They left the cutout above the hole but am I better off cutting a square bit of gyprock secured to batons and taping the seams rather than reinstalling the 300mm cutout and just plastering the circular seam.
____________________________________________________________________________
Officially off the Pies bandwagon
Image Upload:
Da pirate
Posts: 1565
Date Joined: 03/05/15
Square..
Square.. then get some furring channel.
then cut and run the two pieces either
side just off the edges by 50mm screw up
screw in new square then paper tape not
that mesh shit and at least 3/4 of a trowel
either side of joins as your treating it as
a butt join ! Not like a recessed joint .
two coats of base at least to flatten it
out then top coat ! Sand if still not happy
retop till flat .. good luck cheers pirate
Jackfrost80
Posts: 8148
Date Joined: 07/05/12
Cheers mate
Cheers mate
Officially off the Pies bandwagon
SpotHound
Posts: 439
Date Joined: 06/02/14
Trim
They sell plastic trim pieces for exactly this.
Way easier !!
Jackfrost80
Posts: 8148
Date Joined: 07/05/12
Do you know where mate? Did a
Do you know where mate? Did a run around but couldn't find anything
Officially off the Pies bandwagon
Holmes
Posts: 10
Date Joined: 17/12/17
Pirate knows
Some solid information there.