jig hook setup
Submitted by Maverick on Sun, 2007-10-14 17:46
____________________________________________________________________________
OFW member 088
Sponsored by no one and I work for myself so my comments are my own.
SPESS
Posts: 3356
Date Joined: 29/12/06
I use black magic 400lb on
I use black magic 400lb on jigs 300gms and above and 200lbs on 200gms and below.
Keep it tight, reeeeeeel tight!
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
for me
Yeh i use the Owner solid rings to attach the swinging assist hook but use ballbearing swivels, they work alot better and i hardly loose a jig so no issue on paying a bit extra. As for the sizing, 100g jigs i use size #3...... 200g size #4........ and 300g plus i use #5 ball bearing!
*Oceanside-Strudwick,Daiwa,Van Staal,Jigmaster Rods, Banax,Shimano,Penn,Furuno*
Owner/Operator Oceanside Tackle and Marine
364 South Street, O'Connor, Perth WA
Ph# 9337 5682 ** OPEN 7 DAYS *
Maverick
Posts: 1259
Date Joined: 06/06/06
4&5
Size 4 & 5 mainly , we don't want any failures when fishing PE8 & a full drag.
Someone asked me how we do the hook swivel ring set up so I got a close up of a jig all set ready to go , this way you tie the line onto your swivel then you can change the jig or the hook as long as you have some good split ring pliers on hand , just about all my fishing is done with a swivel and ring on a leader then just whack on anything you want bottom rig , jig , trolling lure anything, much better and stronger than a snap swivel.
JMHO
OFW member 088
Sponsored by no one and I work for myself so my comments are my own.
big john
Posts: 8749
Date Joined: 20/07/06
Personally don't like using
Only time I use clips is when trolling for billfish and want to be able to chance lure/leader setups or prerigged gars etc.
John
WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.
Jigs available online in my web store!