hlokk, PE6 is the max i would put on it, the spool capacity just won't allow you to fish PE8. IMO It would be ideal as a PE5 jig reel, tough as nails and its built like a beast.
Maybe some of that PE5 varivas that breaks at 70odd lb would be good if you wanted a heavier breaking strain.
Brenz is getting two and i'm serioulsy considering getting one as well, would be a sick combo on the PE5 xzoga.
this morning. Also had a look at one at the Tackleshack this morning. Amazing quality for the price.
(Colin 1 - Co-founding member of the prestigious Colin Club)
The Safaris were used allot by the Japanese and Singaporeans in earlier days while it was made in Japan but after a couple years out of production while they moved their manufacturing overseas interest seems to have died down. It's a great reel and was popular with the Singaporeans and Japanese using it for popping GT's and Jigging. This reel was designed and build tough. This is probably the only reel that I know of to date that does not really have any problems with corrosion and internal or external failures.
Most guys i know used to use super thin braids on them to get the line capacity required. Lines like the Varivas,YGK Ultra Jigman and the likes will let you run 80lb or more and get enough line on it for most situations. (Unless you plan to be jigging in 250m of water!!! you'll be fine)
I do not own one but have fished with it plenty of times and it sure is a reel that is hard to fault especially at these prices.
Picked up one on the weekend. Hopefully trying it out tomorrow with a xzoga rod :D
Fit 300m of PE4 as stated on the box (but I used a ultra jigman to get 60+lb). To get the required drag I had to bring out the pliers though. Its a bit hard to get a really good grip on the drag knob and its plastic so it scratches if you arent careful with the pliers. A hole through the middle would have been good because then you could put a lever in it to tighten. It has a differentknob in the middle for removing the spool (but keeping your drag set if you're running multiple line classes. Dont know where you get spare spoools though :p)
you need pliers to adjust the drag. Have heard some good things about these reels though and they seem to be priced quite reasonably.
John
I head a little FURTHER NORTH each year,
Leave the cities behind, out of sight of mind,
.......
I was talking to someone who was a bit surprised daiwa are now in the same league as shimano. He said they were the cheapy reel back in the day and couldnt touch shimano :p
The reels not as smooth as a stella/saltiga and doesnt have as much drag capacity (12kg max), but as long as its strong enough, for $300 it makes a great value reel :D
The original Ryobi was made in Japan, a very nice reel but up their in price. About 6 years later they'be brought them back but made in China but apparently still maintaining some Jap parts but very well priced. The cheap shitty models were an attempt to get into the cheap end market for Australia & oversea's but never really worked.
My first reel I ever owned was a Ryobi................ Not sure how it would have stood up to Sambo Jigging but it handled herring and sand whiting ok.. Just!!
Just wondering if there is a difference between the 5000 and the 5000A?
A few sites I've been looking at have the different model numbers, is there a difference or are they actually the same reel with someone too lazy to insert the 'A' at the end of the 5000?
No difference.....the previous Jap made model were called Metal Royal Safari 5000A as that was the 2nd generation model. The current model is just 5000.
till
Posts: 9358
Date Joined: 21/02/08
Ooo and I didn't even know I
Ooo and I didn't even know I wanted one of them!
Colin Hay
Posts: 10407
Date Joined: 23/10/07
They look like pretty serious reels at a great price
(Colin 1 - Co-founding member of the prestigious Colin Club)
Moderator. Proud member of the Fishwrecked "Old Farts". Make sure your subscribed to Fishwrecked Reeltime http://fishwrecked-reeltime.com/
mako magic
Posts: 5785
Date Joined: 03/08/05
certainly are Colin, super
certainly are Colin, super strong
The Tackle shack, for all your fishing needs
huge range of stock to suit any fisherperson.
PH:9248 3800 unit 3/11 Alexander drive Malaga
Stevef
Posts: 478
Date Joined: 27/02/08
Had a bit of a play with one
Had a bit of a play with one earlier today. Looks and feels a nice solid reel.
Steve
hlokk
Posts: 4294
Date Joined: 04/04/08
What line would you be able
What line would you be able to run on these and how much capacity? Could use a spin jigging setup :D
--------------
Always interested in someone to go fishing with
Blake.T.
Posts: 680
Date Joined: 12/12/07
we managed to get a whole
we managed to get a whole spool (250m) of that 50lb suffix multicolor braid on there and that was a little underspooled.
***********************************************************
The Tackle shack, for all your fishing needs.
Huge range of stock to suit any fisherperson.
PH:9248 3800, unit 3/11 Alexander Drive Malaga
hlokk
Posts: 4294
Date Joined: 04/04/08
Is that PE5? If so, should
Is that PE5? If so, should be able to fit a few more lb of high strength japanese jigging braid.
Do they handle the 50lb well, or is it pushing it?
--------------
Always interested in someone to go fishing with
Blake.T.
Posts: 680
Date Joined: 12/12/07
hlokk, PE6 is the max i
hlokk, PE6 is the max i would put on it, the spool capacity just won't allow you to fish PE8. IMO It would be ideal as a PE5 jig reel, tough as nails and its built like a beast.
Maybe some of that PE5 varivas that breaks at 70odd lb would be good if you wanted a heavier breaking strain.
Brenz is getting two and i'm serioulsy considering getting one as well, would be a sick combo on the PE5 xzoga.
***********************************************************
The Tackle shack, for all your fishing needs.
Huge range of stock to suit any fisherperson.
PH:9248 3800, unit 3/11 Alexander Drive Malaga
Colin Hay
Posts: 10407
Date Joined: 23/10/07
Nice coincidence. These reels were featured on IFish on Foxtel
this morning. Also had a look at one at the Tackleshack this morning. Amazing quality for the price.
(Colin 1 - Co-founding member of the prestigious Colin Club)
Moderator. Proud member of the Fishwrecked "Old Farts". Make sure your subscribed to Fishwrecked Reeltime http://fishwrecked-reeltime.com/
seasonsrods
Posts: 120
Date Joined: 08/05/08
The Safaris were used allot
The Safaris were used allot by the Japanese and Singaporeans in earlier days while it was made in Japan but after a couple years out of production while they moved their manufacturing overseas interest seems to have died down. It's a great reel and was popular with the Singaporeans and Japanese using it for popping GT's and Jigging. This reel was designed and build tough. This is probably the only reel that I know of to date that does not really have any problems with corrosion and internal or external failures.
Most guys i know used to use super thin braids on them to get the line capacity required. Lines like the Varivas,YGK Ultra Jigman and the likes will let you run 80lb or more and get enough line on it for most situations. (Unless you plan to be jigging in 250m of water!!! you'll be fine)
I do not own one but have fished with it plenty of times and it sure is a reel that is hard to fault especially at these prices.
brenz
Posts: 2182
Date Joined: 15/06/06
just got mine today cant
just got mine today cant wait to give it a hiding
brenz
"BIT SQUIT LAH" COMMIN TO A RAMP NEAR YOU!!
PROUD USER OF XZOGA RODS
THE TACKLE SHACK 9248 3800
hlokk
Posts: 4294
Date Joined: 04/04/08
Picked up one on the
Picked up one on the weekend. Hopefully trying it out tomorrow with a xzoga rod :D
Fit 300m of PE4 as stated on the box (but I used a ultra jigman to get 60+lb). To get the required drag I had to bring out the pliers though. Its a bit hard to get a really good grip on the drag knob and its plastic so it scratches if you arent careful with the pliers. A hole through the middle would have been good because then you could put a lever in it to tighten. It has a differentknob in the middle for removing the spool (but keeping your drag set if you're running multiple line classes. Dont know where you get spare spoools though :p)
--------------
Always interested in someone to go fishing with
big john
Posts: 8766
Date Joined: 20/07/06
Pliers
you need pliers to adjust the drag. Have heard some good things about these reels though and they seem to be priced quite reasonably.
John
I head a little FURTHER NORTH each year,
Leave the cities behind, out of sight of mind,
.......
WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.
Jigs available online in my web store!
Colin Hay
Posts: 10407
Date Joined: 23/10/07
Times do change I remember when you wouldn't touch Daiwa reels
with a barge pole.
(Colin 1 - Co-founding member of the prestigious Colin Club)
Moderator. Proud member of the Fishwrecked "Old Farts". Make sure your subscribed to Fishwrecked Reeltime http://fishwrecked-reeltime.com/
hlokk
Posts: 4294
Date Joined: 04/04/08
I was talking to someone who
I was talking to someone who was a bit surprised daiwa are now in the same league as shimano. He said they were the cheapy reel back in the day and couldnt touch shimano :p
The reels not as smooth as a stella/saltiga and doesnt have as much drag capacity (12kg max), but as long as its strong enough, for $300 it makes a great value reel :D
--------------
Always interested in someone to go fishing with
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
Ryobi!
The original Ryobi was made in Japan, a very nice reel but up their in price. About 6 years later they'be brought them back but made in China but apparently still maintaining some Jap parts but very well priced. The cheap shitty models were an attempt to get into the cheap end market for Australia & oversea's but never really worked.
This new reel is sweet!
* Oceanside- Advice, Knowledge, Experience....that's our difference *
Owner of "Oceanside Tackle & Marine"
364 South St, O'Connor, Perth Ph 9337 5682
Stevef
Posts: 478
Date Joined: 27/02/08
My first reel I ever owned
My first reel I ever owned was a Ryobi................ Not sure how it would have stood up to Sambo Jigging but it handled herring and sand whiting ok.. Just!!
Ben Derecki
Posts: 1926
Date Joined: 10/10/07
differences?
Just wondering if there is a difference between the 5000 and the 5000A?
A few sites I've been looking at have the different model numbers, is there a difference or are they actually the same reel with someone too lazy to insert the 'A' at the end of the 5000?
HuggyB
Posts: 2515
Date Joined: 03/08/08
5000 - 5000A
I think they are the same beast.
The Terrorist - coming to a fishing spot near you.........
honsu chin
Posts: 2086
Date Joined: 20/09/05
No difference.....the
No difference.....the previous Jap made model were called Metal Royal Safari 5000A as that was the 2nd generation model. The current model is just 5000.
* Oceanside- Advice, Knowledge, Experience....that's our difference *
Manager/Tackle Rat @ "Oceanside Tackle & Marine"
364 South Street, O'Connor, Perth Ph# 9337 5682
mako magic
Posts: 5785
Date Joined: 03/08/05
we have sold out of them
we have sold out of them anyway. not sure on when the next shipment will arrive but we will post of when they do
The Tackle shack, for all your fishing needs
huge range of stock to suit any fisherperson.
PH:9248 3800 unit 3/11 Alexander drive Malaga
Ben Derecki
Posts: 1926
Date Joined: 10/10/07
onya
Thanks fellas.