Furuno 587
Submitted by Curndog on Tue, 2024-05-21 15:49
Hey guys,
got a furuno 587 and it has been a pain to turn on lately / sometimes dosent power up without removing and reinserting power cord. Have noticed a bit of corrosion on the head unit terminals, have sprayed them with contact cleaner but it still continues to be a problem. Anyone had this issue with sounders before? I was thinking maybe getting a small wire brush to scrub them but it's arkward to get in there.
little johnny
Posts: 5344
Date Joined: 04/12/11
The fine
Pins are a pain . Bend and corrode easy. One may be gone to far ?
sea-kem
Posts: 14897
Date Joined: 30/11/09
Might be the cord connectors
Might be the cord connectors too mate, small wire brush is the go I reckon.
Love the West!
CD
Posts: 46
Date Joined: 06/12/16
If in doubt take it to
If in doubt take it to Fremantle Marine Electronics. They are a repair agent for Furuno. They were great in helping me work through issues with mine.
Bodgy 79
Posts: 271
Date Joined: 04/08/22
Once repaird and working use
Once repaird and working use electrogaurd grease in all connections and fittings like these.I do a lot of work with electronic controlled hydraulics and can bus and use the stuff everywhere,keeps moisture ect out without any interference
Curndog
Posts: 448
Date Joined: 21/11/16
Thanks for the replies guys,
Thanks for the replies guys, I used some contact cleaner and a harsh tooth brush. Seems to be working now but one of the pins definatley looks worse than the rest.