Anti Foul Removal
Submitted by Browndog on Wed, 2022-03-02 12:21
Hi FW Crew, does anybody have suggestions for who I can get to remove old anti foul from my 25' Powercat?
Boat is on a trailer so can tow NOR or SOR as needed. Will be going into a Hillarys pen with a Sea Pen so antifoul not needed. Intent is to remove and take it back to gelcoat and polish. Have tried a few places but nobody seems to do or have experience at comlete removal.
Cheers,
BD.
Swompa
Posts: 3868
Date Joined: 14/10/12
Folks used to use Gunwash
Folks used to use Gunwash annually to clean a 60 foot boat. Took it back to bog.
A shit of a job without a doubt.
Faulkner Family
Posts: 18013
Date Joined: 11/03/08
Lots of scraping and sanding
Lots of scraping and sanding will do it. Time and elbow work. If not sure if you want to do the job without knowing how to do it try Google. Always helpfully videos to watch on any topic
RUSS and SANDY. A family that fishes together stays together
Browndog
Posts: 582
Date Joined: 10/04/12
Contractor
Thanks guys, I know 100% that I don't want to do this job, was hoping to find a contractor to do it. I spoke to the boat lifter at Hillarys who said they can blast it, but not polish etc. Ideally looking for someone to do the whole job.
Cheers,
BD
resurgence
Posts: 575
Date Joined: 23/04/14
Probably need a shipwright service
Contact Ben Punch at Fibrelite Boats.
SpotHound
Posts: 439
Date Joined: 06/02/14
Time
All the rubbing from the seapen mesh will take it off over time.
Rob H
Posts: 5789
Date Joined: 18/01/12
if you scroll down this
if you scroll down this threa you'll see how I did it on my Cruisecraft.
I was sure I did a specific thread, you may be able to locate it?
http://fishwrecked.com/forum/antifoul-removal-sodablasting-etc-updated
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
Browndog
Posts: 582
Date Joined: 10/04/12
Thanks Rob
Cheers Rob, yeah I did see yoiur post when I did a search, pretty much convinced me that I AM NOT going to do it myself lol!
I may have something worked out, but in the short term I think I'm just gonna chuck her in the pen as is, the anti foul won't cause any issues apart from looking a bit crappy and maybe using a bit of extra fuel or dropping a knot or two.
Thanks for the reply.
Cheers,
BD
pelagicyachts
Posts: 1322
Date Joined: 23/02/11
i have used a stripper before
i have used a stripper before to get it off - think it was called smart strip - was given to me but i know you can source (perhaps online?) - it was good at removing the bulk, paint it on scrape the foul off, but didnt take us back to clean gelcoat - wetsanding required from there
Brock O
Posts: 3220
Date Joined: 11/01/08
Mate had his done down at
Mate had his done down at BlueHQ in freo...sand blasted, said the gelcoat came out ok but he had the whole boat painted after anyway.
As you know make sure you find the right crew.
SeperateKnob
Posts: 666
Date Joined: 28/11/16
I used Peter g antifoul
I used Peter g antifoul remover with great success. Doesn't remove primer though.
Rob H
Posts: 5789
Date Joined: 18/01/12
I started with that then
I started with that then found the oven cleaner worked just as good for 1/2 the price
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
Subaquatic
Posts: 514
Date Joined: 23/04/11
Stephen Handley at Fremantle
Stephen Handley at Fremantle Shipwrights did ours, all the way back to Gelcoat.
trout1105
Posts: 28
Date Joined: 03/07/09
Why not simply put a new
Why not simply put a new coat of antifoul on the boat, It should last for a long time if you are not leaving the boat in the water.
This is the cheapest and easiest solution unless of course you want the antifoul gone for "Cosmetic" reasons